OEM Sales & Services (Warranty & Non-Warranty)
Factory Trained, Authorized and Experienced
Since 1997 - Expert support you can depend on!
Above Left, TCM-100 with DF Gauge
Above Center, TCM-350 with DF Gauge
This Software connects to DFE2 & DFS2 Gauges
It will also work with Legacy Gauges
TCM-100 Motorized Test Stand
For use with DF Series Gauges
The TCM-100 is a low-cost Test Stand for use with DFX2, DFE2 and DFS2 Series Force Gauges. The maximum force is 100 lbs (500N). The TCM Series can also be used with some Older Chatillon Force Gauges.
The color LED Display confirms the set speed, up to 40 inches per minute. Two knobs are adjusted on a rod to make limits of travel. The machine will run from one limit (upper or lower) until it contacts the opposite limit, where the machine will stop. The switch is then activated in the opposite direction until the machine returns to the original limit. This simple operation is effective for making tensile "break tests" or compressive "rupture tests".
The travel is 16 in (Standard Model) or 32 in (Extended Version).
A splinter shield and foot switch are available as non-standard accessories.
Above: DF Series Gauge
on a TCM-100
(Free Software with DFS2 Gauges)
Above: Optional Footswitch
For TCM Test Stands
TCM-100 Standard Accessories
TCM-350 Motorized Test Stand
For use with DF Series Gauges
The TCM-350 is a low-cost Test Stand for use with DFX2, DFE2 and DFS2 Series Force Gauges. The maximum force is 350 lbs (1.5KN). The TCM Series can also be used with some Older Chatillon Force Gauges.
The color LED Display confirms the set speed, up to 20 inches per minute. Two knobs are adjusted on a rod to make limits of travel. The machine will run from one limit (upper or lower) until it contacts the opposite limit, where the machine will stop. The switch is then activated in the opposite direction until the machine returns to the original limit. This simple operation is effective for making tensile "break tests" or compressive "rupture tests".
The travel is 16 in (Standard Model) or 32 in (Extended Version).
A splinter shield and foot switch are available as non-standard accessories.
MT150 & MT500 Manual Test Stands
For use with DF Series Gauges
Our manual test stands are easy-to-use solutions for force measurement applications. The manual test stands can be used with the Chatillon force gauges.
Please note: This option should not be used where variation of test speed may present a problem. See also Force Test Software. The motorized versions, LTCM-100 and LTCM-500 are recommended for constant rate extension applications with force gauges. Please contact our office to learn more about testing of materials and components of all kinds.
The Chatillon MT Series manual test stand is a flexible, easy-to-use solution for force measurement. It comes in two versions: the MT150 with a 150 lbf (660N) capacity and the MT500 with a 500 lbf (2.5 kN) capacity.
The 150 mm (6 inch) throat makes the MT Series excellent for testing large specimens, and the removable plate is designed to accommodate metric as well as imperial threaded fixtures.
The MT Series manual test stands are often used with the DFX II force gauge to check the force necessary to depress a button, or with the LG mechanical gauge to perform low range pull tests at the end of a production line where caps are placed on spray bottles. They are also used to test the force necessary to fold a cardboard container into proper shape.
The MT Series Stands are available with
Hand Wheel or Lever Actuators
When ordering a force gauge mounting kit the parts shown in FIGURE 1 will be supplied as indicated. For DFE2/DFS2/DFX2 Series Gauges use SPK-MT-0001 mounting kit from 0 to 150 LBF testing and use SPK-MT-0004 mounting kit for 150 to 500 LBF testing.
Click Here for Operator's Manual
Click Here for Operator's Manual
W. D. Turner Company, Inc.
Materials Testing Sales & Services
Accredited Member Better Business Bureau
